Skydance DMX AC Switch

Overview

RDM/Stand-alone function/Numeric display Features ● DMX512 decoder o control power on/off to cater for the unwanted dimming lighting system. ● One channel output, AC input and AC output, only one DMX512 address. ● Comply with the DMX512 standard protocols. ● Digital numeric display set DMX to decode start address by buttons. ● RDM function can realize intercommunication between DMX master and decoder. For example, DMX decoder address can be set by DMX master console. ● Stand-alone manual on/off mode selectable, which be controlled by buttons, instead of DMX signal. Input and Output Input voltage: AC100-240V Output voltage: AC100-240V Output current: Max 5A Output power: 500-1200W DP Note: 1. A DMX signal amplifier is needed if more than 32 decoders are connected, or use overlong signal line, signal amplification should not be more than 5 times continuously. 2. If the recoil effect occurs because of longer signal line or bad line quality, please try to connect 0.25W The 90-120Ω terminal resistor at the end of each DMX signal line. 3. If output connects with a capacitive or inductive load, the maximum output current only up to 5A. If output connects with resistive load, the maximum output current may up to 15A.