SuperLightingLED COB LED Strip Light Connectors

Overview

This waterproof light strip connector is a fast connection device designed for 4-wire cob waterproof led strips with 10mm PCBs, it can quickly and easily realize the LED connection between light strips, while ensuring good waterproof performance. Adopting press and pierce design, no need for soldering or complicated installation steps. An electrical connection is established by placing the cut light strip inside the connector's clear frame components and pressing the clear frames onto the pin base. There is a hole in the clear frame where the 4-pin cob strip is punctured, and glue can be injected through this to prevent moisture from entering. This connector pierces the FPC board of the led strip from the back side through the built-in pin, directly contacting the internal circuitry without having to peel off the coated adhesive on the surface of the strip, making it suitable for silicone waterproof strips with IP67 / IP68 ratings. Please note that this 4-pin led waterproof connector is for 10mm cob PCB, the waterproof strip width of 10mm PCB is about 12mm. Type: 4 Pin Waterproof Electrical Connector Material: Plastic + Metal Pins Connection: Strip to Strip Max Current: 6A Pins: 4 (only for COB light strips) Apply to: 4-Conductor Waterproof COB RGB Led Strips & Dual-Signal Addressable COB Led Strips Compatible: IP67 and IP68 Silicone-Coated Tape Lights PCB Width: 10mm (waterproof width 12mm) Strip to Wire Cable Length: 210mm/8.27in Options: Select Connector Type: Strip to…